Brand New Cable Extrusion Line For Wire Extrusion Extruding Production Line Jacket Sheath

Main features of machine

This equipment is applicable to outer surface extrusion of wires and cables for insulation materials such as PVC

Technical Characteristics

1. Extrusion Wire Gauge:

1) Inlet Wire Diameter:

2) Finished Wire Diameter: Φ10 mm～Φ70mm

2. Applicable Material: PVC

3. Screw Diameter: Screw Diameter 120mm

4. Extrusion Capacity:max480 kg/h

5. Linear Velocity: 5～150m/min

6. Length of Production Line: 38Meters

7. Installed Capacity: About 155KWh

8. Color: Grass Green

List of machine

Brand of parts

1.Motor is Siemens.

2.Temperature control: RKC

3.Relay:Omron

4.Touch screen: Siemens

5. Bearing:NSK

6. Inverter:Yaskawa

Payment:60% as advance, 40% before shipping

Deliver time: 60 days after advance

Warranty:1.0year (start from the day when the machine is running in Customer’s factory)

120mm Extruder with cross head

Applicable Material: PVC, Plasticization degree of 100%.

Maximum Extrusion Capacity:260kg/hr.

Mechanical Center Height: 1000mm

Ratio of Length and Diameter: 1:25

Compression Ratio: 1:2.8

Rotation Rate of Screw: 0—60 RPM

Material of Screw: One Ø120mm screw with whole tooth nitrogen

treatment of alloy steel and chrome-plated polished surface and screw-passing cooling water device.

Material of Screw Cylinder: 38CrMoA1A alloy steel, nitrogen treatment and precisely grinding. The surface hardness inside the screw cylinder is R2-3 degree higher than that of the front surface of the screw and the screw thread. The cooling water jacket is added on the feed point of the screw cylinder.

Gearbox: Imitation of Italian-type, hardened helical gear gearbox, material of cast steel, oil-bath lubrication, tooth-face high-efficiency quenching and adoption of Japanese NACHI bearing.

Electric Heating: 380V, with even three-phase separated flow.

Screw cylinder electric heating zone 6, the cast aluminum heating ring heating is affixed with cooling air duct.

Head electric heating zone 1, heating by cast aluminum heating ring.

Neck electric zone 1, heating by the electro-thermal tablets.

Eye die electric heating zone 1, heating by the electro-thermal tablets.

Control of Temperature: Use the PID automatic temperature control gauge made in Yangming, Taiwan, automatically set the control under 0-399℃ and use KTYP as the thermal-couple.

Cooling: Screw cylinder zone 6, use 6 sets of cooling fans (550W).

Head: Right-angle adjustable eccentric head.

Host Motor: The motor drags with 90 KW. The inverter controls and unloads by synchronization. The velocity adjustment is convenient and steadily operated.

Jacket Sheath Cable Extrusion Line

100m/min Cable Extrusion Line

Brand New Cable Extrusion Line For Wire Extrusion Extruding Production Line Jacket Sheath Images